LIQUA FAST ICE
Testimonial from customer: Subject: Re: LiquaIce Mold Making Resin
"Thanks for making this available . This rubber does an amazing job in capturing the fine details .
Really find it easy to work with and that the cure time is so quick –we’ll plan on more use of it for sure."
Larry & Suzanne Patterson
|LF100 16oz. LiquaFast-Ice Mold Release Spray||LiquaFast ICE 4kg. Package (about 1 gal.) Part A&B||LiquaFast ICE Mold Making Material|
New LiquaFast™ ICE from CASTALDO® is a transparent two–part 0% shrinkage RTV silicone molding rubber that cures very rapidly at normal room temperatures and cures even faster at slightly warmer temperatures.
That means that you can make a mold from your CAD CAM, RP and SLA models in the morning, shoot waxes 30 minutes later and cast them that afternoon. No more waiting.
New LiquaFast ICE makes strong, tough, tear-resistant permanent molds that last and last and do not become soft with age.
LiquaFast ICE works well with all RP types, including hard-to-mold Solidscape® designs. LiquaFast Ice’s low viscosity makes it easy to measure, mix and pour.
Normal cure time is only 60 – 90 minutes. Faster cure is possible at only 50˚ C. / 120˚ F.
LiquaFast ICE is economical, costing less than traditional silicone RTV materials.
LiquaFast ICE Silicone Molding Rubber Physical Properties:
|Appearance: Transparent, blue
Working time at 23° C / 73° F: 15 minutes
Setting Time at 23° C / 73° F: 60 – 90 minutes
Setting Time at 50° C / 120° F: 30 minutes
Hardness: 40 – 43 Shore A
Cure system: Platinum
|Mixing Ratio: 1 : 1 by weight
Viscosity: 8,500 Cps
Tensile Strength: 3.5 +/- 0.5 N/mm2 508 +/- 73 psi
Tear Strength: 9 +/- 2.0 Nmm 108 +/- 11 ppi
Density: Specific Gravity 1.12
Shelf Life: 18 months