MXBON 105 is a high strength, instant bonding adhesive that is suitable for virtually any fastening application. Mxbon polymerizes when pressed into thin film. The very thin layer of water moisture present on most surface in combination with the absence of oxygen acts as an alkali, which sis the catalyst during bonding.
PREMIUM INSTANT GLUE DIRECTIONS:
Clean the surface to be bonded thoroughly.
Make sure no moisture, dust, or oil is present. Roughing up smooth surfaces with sandpaper will increase the strength of the bond. Apply a small amount of Mxbon to the surface. Lap the two surfaces together to achieve a thin, uniform application. The less adhesive used, the stronger the bond will be.
A SPECIAL TIP:
You may have seen those other glue
companies selling different filling agents. These can be costly and usually consist of nothing more than finely ground plastic. If you buy standard baking soda you can achieve the same results for a fraction of the price! And, the best part ist using baking soda delivers better results!
After you make your intial bond, sprinkle baking soda over the area and saturate the baking soda with MXBON 105. Using this technique will make your bonds stronger! (Only works with MXBON 105)
USE MXBON FOR VIRTUALLY ANY JOB:
O-ring, vacuum belt, and gasket repair
Automotive (weather stripping, dashboard, molding repair)
Fishing (lures, poles)
Metal (steel, aluminum, copper, brass, etc.)
Wood (furniture, models, frames, etc.)
Item# MXBON 50 gram bottle 13.99